* feat(screenshare): emit source type when starting screenshare

* squash: update doc

When a conference is started, the currently used
camera device id is saved. I believe this is happening
because lib-jitsi-meet does not use exact device id
mathcing when calling getUserMedia, so it's possibl
to request camera A but get camera B back because
camera A is not available. When config.startScreenSharing
is true, the syncing occurs and saves the desktop
source id. So when screensharing is stopped, jitsi-meet
requests that desktop source id instead of the preferred
camera.

* fix(large-video): do not show avatar if no url

By default the large video dominant speaker avatar
has an empty src, which will result in a broken
image displaying. There is also disconnect with
non-react code trying to set an undefined src.
To prevent such until local avatar generation
work is done in the future, just don't show the
avatar.

* fix(conference): set the room instance earlier

Set the room instance on APP.conference before triggering
a redux update of the conference being set,, because
middleware can then fire and call methods on APP.conference
that depend on the room being set.

* get local participant directly from store instead of from global

Stores the Logger.LogCollector instance in base/logging state instead of
global APP variable and enables it on mobile.

* feat(screenshare): support remote wireless screensharing

- Pass events to the ProxyConnectionService so it can
  handle establishing a peer connection so a remote
  participant, not in the conference, can send a
  video stream to the local participant to use as a
  local desktop stream.
- Modify the existing start screensharing flow to accept
  a desktop stream instead of always trying to create one.

* adjust ProxyConnectionService for lib review changes

Delay removing the room reference. This is in case a
consumer of the API is attempting to submit feedback
after hangup but before redirecting to another page.
If the room reference is removed, feedback submission
will fail during this period.

This feature is intended for spot. Spot can have an
HDMI -> usb adapter hooked up to it. In that case,
attempting to screenshare should use that adapter
as a screensharing source. Jitsi-Meet should pass
a configured screenshare source into lib-jitsi-meet
so it can be used as a source.

- Reset some state on the singletons conference
  and VideoLayout.
- Add a way for LocalVideo to clean itself up
  by sharing logic with the other SmallVideos.
- Add clearing of chat messages so they don't
  linger.
- Remove some UI event listeners.

- Change "features/chat" to support listening for new chat messages
  and storing them, removing that logic from conference.js.
- Combine chat.scss and side_toolbar_container.css, and remove unused
  scss files. Chat is the only side panel so the two concepts have
  been merged.
- Remove direct access to the chat feature from non-react and non-redux
  flows.
- Modify the i18n translate function to take in an options object.
  By default the option "wait" is set to true, but that causes
  components to mount after the parent has been notified of
  an update, which means autoscrolling down to the latest rendered
  messages does not work. With "wait" set to false, the children
  will mount and then the parent will trigger componentDidUpdate.
- Create react components for chat. Chat is the side panel
  plus the entiren chat feature. ChatInput is a child of Chat and
  is used for composing messages. ChatMessage displays one message
  and extends PureComponent to limit re-renders.
- Fix a bug where the toolbar was not showing automatically when
  chat is closed and a new message is received.
- Import react-transition-group to time the animation of the
  side panel showing/hiding and unmounting the Chat component.
  This gets around the issue of having to control autofocus if the
  component were always mounted and visibility toggled, but
  introduces not being able to store previous scroll state
  (without additional work or re-work).

The code for handling device availability has been disabled for a long time,
plus it's ill named since it represents 2 abstractions: lack of permissions and
lack of devices.

Time for it to rest in the git graveyard.

Extracts methods which share the common logic. There are still some
leftovers on the web side left which are not used on RN. But this can be
a first step.

The process for doing a replaceLocalTrack is async. Is it
possible to trigger replaceLocalTrack multiple times before
each call is finished. This leads to situations where
replaceLocalTrack is called multiple times with oldTrack being
null and a new track. In this scenario, each new track will be
added, causing UI issues such as the local participant's
large video not displaying for remote participants.

The action replaceLocalTrack is used when unmuting audio or
video, when creating new tracks on device switch, and when
toggling screensharing. These actions can collide with each
other. One way to fix this would be to queue replaceLocalTrack.

This changes a log message from “initialized with %s local tracks 2” to “initialized with 2 local tracks”.

This makes the logs more readable.

* feat(welcome-page): be able to open settings dialog

- Create a getter for getting a settings tab's props so the device
  selection tab can get updated available devices.
- Be able to call a function from a tab after it has mounted. This is
  used for device selection to essentially call enumerateDevices on
  the welcome page so the device selectors are populated.
- Remove event UIEvents.AUDIO_OUTPUT_DEVICE_CHANGED. Instead directly call
  setAudioOutputDeviceId where possible.
- Fix initialization of the audioOutputDeviceId in settings by defaulting
  the audio output device to the one set in settings.

* squash: updateAvailableDevices -> getAvailableDevices, add comment for propsUpdateFunction

* [WEB] add UI for transcription

* add analytics event for button, do not use global APP object

* use props instead of state, use local conference to kick participant

* put imports in alphabetical order

* add translation for TranscribingLabel

* fix merge conflict

* add closed caption button

* purge OverFlowMenuItem which starts and stops Transcription

* readd closed caption icon and fix small issues due to purge

* delete unused icon in _font.scss

* ref(large-video): combine selectParticipant logic from web

Currently native/middleware/redux has its own logic for selecting a participant
on the bridge. To have the logic web respect that logic, a few changes are
needed.
- Web no longer has its own call to selectParticipant.
- To keep in line with web logic selectParticipant action should act even when
  there is no track. This makes it so that when a participant does get a track
  that the bridge will send high quality. The bridge can already handle when the
  selected participant does not have a video track.
- The timing of web is such that on joining an existing conference, a
  participant joins and the participant's tracks get updated and then the
  conference is joined. The result is selectParticipant does not get fired
  because it no-ops when there is no conference. To avoid having to make
  uncertain changes (to be lazy), update the selected participant on conference
  join as well.

* squash: update comment, pass message to error handler

* Show subtitles when Jigasi sends transcription results in JSON

* fix: Import PropTypes from prop-types.

* apply feedback on initial PR

* Changed Object to Map, alphabetic ordering fixes ,css changes in transcription subtitles

* Sends Map of transcriptMessages as prop to Component

* Documentation fixes and uses config in redux state

* Minor doc fix

* rename feature 'transcription' to 'subtitles'

* Moves subtitles config to interfaceConfig and minor fixes

* minor lint fix

* ref(device-selection): do not override var that is not reference again

* ref(device-selection): do not override var that is not reference again

* ref(device-selection): always update known devices on device list update

* ref(device-selection): replace call to get devices from legacy to redux

* ref(device-selection): remove unused device list state from mediaDeviceHelper

* ref(device-selection): update store before updating UI

Unfortunately, as the Jitsi Meet development evolved the routing mechanism
became more complex and thre logic ended up spread across multiple parts of the
codebase, which made it hard to follow and extend.

This change aims to fix that by rewriting the routing logic and centralizing it
in (pretty much) a single place, with no implicit inter-dependencies.

In order to arrive there, however, some extra changes were needed, which were
not caught early enough and are thus part of this change:

- JitsiMeetJS initialization is now synchronous: there is nothing async about
  it, and the only async requirement (Temasys support) was lifted. See [0].
- WebRTC support can be detected early: building on top of the above, WebRTC
  support can now be detected immediately, so take advantage of this to simplify
  how we handle unsupported browsers. See [0].

The new router takes decissions based on the Redux state at the time of
invocation. A route can be represented by either a component or a URl reference,
with the latter taking precedence. On mobile, obviously, there is no concept of
URL reference so routing is based solely on components.

[0]: https://github.com/jitsi/lib-jitsi-meet/pull/779

It can be that deviceChangeListener is never defined because
the isDeviceList call never completes. On hangup, that would
cause an error to be thrown within lib-jitsi-meet because of
an attempt to remove an undefined event handler. That is
what happens on Safari right now.

- Instead of having 4 listeners for local connection status
  updates and 1 for remote, remove two of the redundant listeners.
- Instead of calling into 4 separate VideoLayout methods to update a
  participant's connection status, expose one handler.

* ref(video-layout): move middleware for TRACK_ADDED

* ref(video-layout): call mucJoined when redux knowns of conference join

* feat(settings): setting dialog

- Move device selection, profile edit, language select, moderator
  options, and server auth into one modal with tabs.
- Remove side panel profile and settings and logic used to update
  them.
- Pipe server auth status into redux to display in the settings
  dialog.
- Change filmstrip only device selection popup to use the new
  stateless settings dialog component.

* squash: do not show profile tab if not guest

* squash: profile button not clickable if no profile to show

* squash: nits

* ref: Settings dialog.

* Adds an option to disable features based on token data.

Reverts changes from b84e910086, removes disableDesktopSharing option and an interface_config option.

* Disable recording button based on token features data.

Hide recording if local participant isGuest and roles based on token.
When enableUserRolesBasedOnToken is enabled we were not hiding the record button for guests.

* Adds filtering of jibri iqs and rayo based on features.

Moves feature checking in separate utility function.
Renames utility method.

* Adds a footer text when outbound-call is not feature enabled.

* Fixes comments.

* ref(toolbar): show recording features based on explicit configs

* squash: bring back button configs, use final config names

* squash: update interfaceConfig comment, remove unused config whitelist

* squash: change order of button enabled checks to reduce diff

* squash: fileRecording -> fileRecordings

The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.

Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.

Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.

Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:

If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.

The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.

The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.

Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".

One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.

* feat(recording): frontend logic can support live streaming and recording

Instead of either live streaming or recording, now both can live together. The
changes to facilitate such include the following:
- Killing the state storing in Recording.js. Instead state is stored in the lib
  and updated in redux for labels to display the necessary state updates.
- Creating a new container, Labels, for recording labels. Previously labels were
  manually created and positioned. The container can create a reasonable number
  of labels and only the container itself needs to be positioned with CSS. The
  VideoQualityLabel has been shoved into the container as well because it moves
  along with the recording labels.
- The action for updating recording state has been modified to enable updating
  an array of recording sessions to support having multiple sessions.
- Confirmation dialogs for stopping and starting a file recording session have
  been created, as they previously were jquery modals opened by Recording.js.
- Toolbox.web displays live streaming and recording buttons based on
  configuration instead of recording availability.
- VideoQualityLabel and RecordingLabel have been simplified to remove any
  positioning logic, as the Labels container handles such.
- Previous recording state update logic has been moved into the RecordingLabel
  component. Each RecordingLabel is in charge of displaying state for a
  recording session. The display UX has been left alone.
- Sipgw availability is no longer broadcast so remove logic depending on its
  state. Some moving around of code was necessary to get around linting errors
  about the existing code being too deeply nested (even though I didn't touch
  it).

* work around lib-jitsi-meet circular dependency issues

* refactor labels to use html base

* pass in translation keys to video quality label

* add video quality classnames for torture tests

* break up, rearrange recorder session update listener

* add comment about disabling startup resize animation

* rename session to sessionData

* chore(deps): update to latest lib for recording changes