* Button conditionally shown based on if the feature is enabled and available
* Hooks for launching the invite UI (delegates to the native layer)
* Hooks for using the search and dial out checks from the native layer (calls back into JS)
* Hooks for handling sending invites and passing any failures back to the native layer
* Android and iOS handling for those hooks

Author: Ryan Peck <rpeck@atlassian.com>
Author: Eric Brynsvold <ebrynsvold@atlassian.com>

Activity.enterPictureInPictureMode can fail for a couple of reasons
mentioned in the JSDoc:

"The system may disallow entering picture-in-picture in various cases,
including when the activity is not visible, if the screen is locked or
if the user has an activity pinned."

It seems to be safe to assume that those cases will be caught by
a RuntimeException handler (only RuntimeExceptions can be left without
explicit catch block).

Anyway the root cause for problems is the fact that the current process
for going to the picture in picture mode is not synchronised with
Activity's lifecycle. On Activity's "userLeaveHint" callback we dispatch
async task to the JS code which only then after dispatching some more
stuff eventually call native method that enter PiP. In case we spend too
much time on the JS side and the Activity goes to PAUSED state the call
will fail with IllegalStatException: "activity is not visible",
"activity is paused" etc. This means with this fix the app will not
crash, but we'll see it sometimes not go to the PiP mode as expected.

This only works automatically on Android >= 8. On other platforms / versions, it
relies on the SDK user on implementing a "reduced UI" mode and reacting to the
"request PIP" delegate method.

On Android we go into "immersive mode" when in a conference, this is our way of
being full-creen. There are occasions, however, in which Android takes us out of
immerfive mode without us (the application / SDK) knowing: when a child activity
is started, a modal window shown, etc.

In order to be resilient to any possible change in the immersive mode, register
a listener which will be called when Android changes it, so we can re-eavluate
if we need it and thus re-enable it.

Turns out this was a bit more involved than I originally thought due to an
interesting (corner) case: IFF the user was never asked about microphone
permissions and the call starts with audio muted, unmuting from the CallKit
interface won't work (iOS won't show the prompt, it fails immediately) and we
need to sync the mute state back.

The documentation states this is possible, so make sure we handle such errors.

Ref:
https://developer.android.com/reference/android/provider/Settings.html#ACTION_APPLICATION_DETAILS_SETTINGS

* ref: Restructures the pinned/unpinned events.

* ref: Refactors the "audio only disabled" event.

* ref: Refactors the "stream switch delay" event.

* ref: Refactors the "select participant failed" event.

* ref: Refactors the "initially muted" events.

* ref: Refactors the screen sharing started/stopped events.

* ref: Restructures the "device list changed" events.

* ref: Restructures the "shared video" events.

* ref: Restructures the "start muted" events.

* ref: Restructures the "start audio only" event.

* ref: Restructures the "sync track state" event.

* ref: Restructures the "callkit" events.

* ref: Restructures the "replace track".

* ref: Restructures keyboard shortcuts events.

* ref: Restructures most of the toolbar events.

* ref: Refactors the API events.

* ref: Restructures the video quality, profile button and invite dialog events.

* ref: Refactors the "device changed" events.

* ref: Refactors the page reload event.

* ref: Removes an unused function.

* ref: Removes a method which is needlessly exposed under a different name.

* ref: Refactors the events from the remote video menu.

* ref: Refactors the events from the profile pane.

* ref: Restructures the recording-related events.

Removes events fired when recording with something other than jibri
(which isn't currently supported anyway).

* ref: Cleans up AnalyticsEvents.js.

* ref: Removes an unused function and adds documentation.

* feat: Adds events for all API calls.

* fix: Addresses feedback.

* fix: Brings back mistakenly removed code.

* fix: Simplifies code and fixes a bug in toggleFilmstrip

when the 'visible' parameter is defined.

* feat: Removes the resolution change application log.

* ref: Uses consistent naming for events' attributes.

Uses "_" as a separator instead of camel case or ".".

* ref: Don't add the user agent and conference name

as permanent properties. The library does this on its own now.

* ref: Adapts the GA handler to changes in lib-jitsi-meet.

* ref: Removes unused fields from the analytics handler initializaiton.

* ref: Renames the google analytics file and add docs.

* fix: Fixes the push-to-talk events and logs.

* npm: Updates lib-jitsi-meet to 515374c8d3.

* fix: Fixes a recently introduced bug in the google analytics handler.

* ref: Uses "value" instead of "delay" since this is friendlier to GA.

* ref(analytics): centralize all event names

* squash: fix typo and alpha ordering

* squash: rename file to AnalyticsEvents to parallel lib-jitsi-meet

Rearrange the ToolbarButtons in the secondary Toolbar in order to mostly
group the media-related ones such as the AudioRouteButton, the
switchCamera button, and the audio-only mode button.

Due to the difference in nature, the iOS and Android implementations are
completely different:

iOS: MPVolumeView is used, which allows us to place a button which will launch a
native route picker provided by iOS itself. This view is different depending on
the iOS version, with the iOS 11 version being more complete.

Android: A completely custom component is used, which displays a bottom sheet
with the device categories, not devices individually. This is akin to the sheet
in the builtin dialer.

This commit adds extra actions/Redux state to be able to deal with
the GUM operation being in progress. There will be early local track
stub in the Redux state for any a local track for which GUM has been
called, but not completed yet.

Local track is considered valid only after TRACK_ADDED event when it
will have JitsiLocalTrack instance set.

The intention was to override 'this' argument of 'Error.toString'.

Fallback to the room name otherwise. This allows us to have better entries in
the phone history.

HIDE_DIALOG happens between WILL_JOIN and JOINED so get the joining conference
from the state instead of the action.

ESLint 4.8.0 discovers a lot of error related to formatting. While I
tried to fix as many of them as possible, a portion of them actually go
against our coding style. In such a case, I've disabled the indent rule
which effectively leaves it as it was before ESLint 4.8.0.

Additionally, remove jshint because it's becoming a nuisance with its
lack of understanding of ES2015+.

* Javadoc introduced @code as a replacement of <code> and <tt> which is
  better aligned with other javadoc tags such as @link. Use it in the
  Java source code. If we switch to Kotlin, then we'll definitely use
  Markdown.

* There are more uses of @code in the JavaScript source code than <tt>
  so use @code for the sake of consistency. Eventually, I'd rather we
  switch to Markdown because it's easier on my eyes.

* Xcode is plain confused by @code and @link. The Internet says that
  Xcode supports the backquote character to denote the beginning and end
  of a string of characters which should be formatted for display as
  code but it doesn't work for me. <tt> is not rendered at all. So use
  the backquote which is rendered itself. Hopefully, if we switch to
  Markdown, then it'll be common between JavaScript and Objective-C
  source code.

This commit adds initial support for CallKit on supported platforms: iOS >= 10.

Since the call flow in Jitsi Meet is basically making outgoing calls, only
outgoing call support is currently handled via CallKit.

Features:
 - "Green bar" when in a call.
 - Native CallKit view when tapping on the call label on the lock screen.
 - Support for audio muting from the native CallKit view.
 - Support for recent calls (audio-only calls logged as Audio calls, others show
   as Video calls).
 - Call display name is room name.
 - Graceful downgrade on systems without CallKit support.

Limitations:
 - Native CallKit view cannot be shown for audio-only calls (this is a CallKit
   limitaion).
 - The video button in the CallKit view will start a new video call to the same
   room, and terminate the previous one.
 - No support for call hold.

The basic indicator is extracted into a LoadingIndicator component,
which then NetworkActivityIndicator displays (or not) based on network
activity.

In certain scenarios we do need to import files instead of features but
even then it is our coding style to not write the file extension.

The error is stored in the redux store in base/config so other components can
consult it. It is also broadcasted as a new event in the external API for the
SDK.

I'm not saying that the two commits in question were wrong or worse than
what I'm offering. Anyway, I think what I'm offering brings:

* Compliance with expectations i.e. the middleware doesn't compute the
next state from the current state, the reducer does;

* Clarity and/or simplicity i.e. there's no global variable (reqIndex),
there's no need for the term "index" (a.k.a "reqIndex") in the redux
store.

* By renaming net-interceptor to network-activity feels like it's
preparing the feature to implement a NetworkActivityIndicator React
Component which will take on more of the knowledge about the specifics
of what is the network activity redux state exactly, is it maintained by
interception or some other mechanism, and abstracts it in the feature
itself allowing outsiders to merely render a React Component.

Works only for XHR requests, which is the only network request mobile performs
(WebRTC traffic aside). The fetch API is implemented on top of XHR, so that's
covered too.

Requests are kept in the redux store until they complete, at which point they
are removed.

Simplify the code by using a bitfied instead of a couple of boolean flags. This
allows us to mute the video from multiple places and only make the unmute
effective once they have all unmuted.

Alas, this cannot be applied to the web without a massive refactor, because it
uses the track muted state as the source of truth instead of the media state.