Co-authored-by: Vlad Piersec <vlad.piersec@8x8.com>

* Add configuration to disable removing raised hand on dominant speaker change

* Fix lint problem

* Avoid dispatching unnecessary action

* Fix lint problem

- unify naming for sound id values

* Fix: removed web actions from common middlewares

* Fixed raise hand sound

Fix sound to play on raise not lower and work on keyboard shortcut as well

* Fixed reaction keyboard shortcuts

Register shortcuts only when there's more than one participant

* Enforce reactions feature flag on reaction received

* Disable reactions by default on native

* Enable reactions on native by default

* Sort props alphabetically

* Created isreactionsEnabled function

* Remove unused imports

* Fix. No longer show toolbox on reactions and jibri

On message received don't show toolbox for jibri

* Fix isReactionsEnabled function for native

On native check for flag and config option as well

This reverts commit 38f9c97f40.

* fix(participants): Change from array to Map

* fix(unload): optimise

* feat: Introduces new states for e2ee feature.

Stores everyoneSupportsE2EE and everyoneEnabledE2EE to minimize looping through participants list.

squash: Uses participants map and go over the elements only once.

* feat: Optimizes isEveryoneModerator to do less frequent checks in all participants.

* fix: Drops deep equal from participants pane and uses the map.

* fix(SharedVideo): isVideoPlaying

* fix(participants): Optimise isEveryoneModerator

* fix(e2e): Optimise everyoneEnabledE2EE

* fix: JS errors.

* ref(participants): remove getParticipants

* fix(participants): Prepare for PR.

* fix: Changes participants pane to be component.

The functional component was always rendered:
`prev props: {} !== {} :next props`.

* feat: Optimization to skip participants list on pane closed.

* fix: The participants list shows and the local participant.

* fix: Fix wrong action name for av-moderation.

* fix: Minimizes the number of render calls of av moderation notification.

* fix: Fix iterating over remote participants.

* fix: Fixes lint error.

* fix: Reflects participant updates for av-moderation.

* fix(ParticipantPane): to work with IDs.

* fix(av-moderation): on PARTCIPANT_UPDATE

* fix(ParticipantPane): close delay.

* fix: address code review comments

* fix(API): mute-everyone

* fix: bugs

* fix(Thumbnail): on mobile.

* fix(ParticipantPane): Close context menu on click.

* fix: Handles few error when local participant is undefined.

* feat: Hides AV moderation if not supported.

* fix: Show mute all video.

* fix: Fixes updating participant for av moderation.

Co-authored-by: damencho <damencho@jitsi.org>

* feat: Initial UI part for A/V moderation.

Based on https://github.com/jitsi/jitsi-meet/pull/7779

Co-authored-by: Gabriel Imre <gabriel.lucaci@8x8.com>

* feat: Hides context menu in p2p or only moderators in the meeting.

* feat: Show notifications on enable/disable.

* feat(moderation): Add buttons to participant list & notifications

* fix(moderation): Fix raised hand participant leaving

* feat(moderation): Add support for video moderation

* feat(moderation): Add mute all video to context menu

* feat(moderation): Redo participants list 'More menu'

* fix: Fixes clearing av_moderation table.

* fix: Start moderation context menu

* fix(moderation): Show notification if unapproved participant tries to start CS

Co-authored-by: Gabriel Imre <gabriel.lucaci@8x8.com>
Co-authored-by: Vlad Piersec <vlad.piersec@8x8.com>

- update lib-jitsi-meet to version with support for replacing participant

Previously gravatars (external resources) were preloaded even if
disableThirdPartyRequests was set to true in the config, as the
config may be empty at the time of preloading.

Closes: #5670
Signed-off-by: Christoph Settgast <csett86@web.de>

* add option for disabling join/leave sounds

* document disableJoinLeaveSounds and add it to whitelist

* Added mute video feature

* Fixed export

* Fixed some issues

* Added remote video mute notification

* Fixed import

* Fixed conference event handling

* Fixed some linting issues

* Fixed more linter errors

* turn screenshare off on remote video mute

* Fix linter issue

* translations added for mute video feature

* Added video mute button to interface config

* Updated lib-jitsi-meet

* Fix copy paste error

Co-authored-by: nurjinn jafar <nurjin.jafar@nordeck.net>

* Expose raise hand event to external application

* Fix linting issues

* fix the app non existing issue

We were not processing properties which are set (fire properties updated) before the conference joined event is fired.

Also, default to libravatar.

Closes: https://github.com/jitsi/jitsi-meet/issues/4927

Through several avatar work iterations it's no longer used.

getLocalParticipant returns a participant object stored in Redux, not a
JitsiParticipant object.

Refs: https://github.com/jitsi/lib-jitsi-meet/pull/1108

Otherwise the participant will not have been added yet
to state so the participant name will not display in
the notification.

Also, use the helper function to get the display name for a participant.

BaseApp does all the heavy-lifting related to creating the redux store,
navigation, and so on.

App currently handles URL props and actually triggering navigation based on
them.

Instead of keeping dominant speaker locally, get it from redux and be
updated when the dominant speaker changes. This is in an attempt to mimic
the video layout being reactified and connected to redux.

Try to use the getCurrentConference function wherever the indention is
to check for the current conference.

Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.

The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.

Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.

The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.

Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>

The Jitsi Meet app always has at most 1 conference of primary interest.
It may have to juggle with 2 JitsiConference instances at the same time
if 1 is in the process of being left and one is joining/joined. But the
one which is joining or joined (which we call conference in the
features/base/conference redux state) is the one "of interest", the
other one is "clean up". Consequently, the remote participants of the
conference "of interest" are the remote participants "of interest" and
the others are "clean up". In order to reduce the time during which
there may be multiplying remote thumbnails, clean the remote
participants who are no longer "of interest" up.

The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.

Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.

Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.

Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:

If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.

The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.

Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".

One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.