Up until now, mobile was oblivious to participants' presence state. Presence
state handling is required (probably, amongst other things) for "call flows".
So, let's add it! This is done by gathering the presence state when a
participant first joins, and handling subsequent changes.
* feat(settings): setting dialog
- Move device selection, profile edit, language select, moderator
options, and server auth into one modal with tabs.
- Remove side panel profile and settings and logic used to update
them.
- Pipe server auth status into redux to display in the settings
dialog.
- Change filmstrip only device selection popup to use the new
stateless settings dialog component.
* squash: do not show profile tab if not guest
* squash: profile button not clickable if no profile to show
* squash: nits
* ref: Settings dialog.
feat(base/conference): CONFERENCE_FAILED on CONNECTION_FAILED
Emits CONFERENCE_FAILED in response to CONNECTION_FAILED event
which then triggers JitsiConference.leave() through the middleware
processing. Also base/conference state will be adjusted. It is to have
a consistent redux state in which both connection and conference are
failed. It could happen that in a buggy environment the XMPP connection
is dropped, but the media is still flowing which would result in weird
user experience.
fix(base/connection/reducer): clear 'connection' field
Currently the listeners for disconnected and failed connection events
are unsubscribed as soon as the connection is established, so
the CONNECTION_DISCONNECTED is never triggered which would clear the
'connection' field. This commit will clear the 'connection' state on
CONNECTION_WILL_CONNECT. It's needed anyway given that there's no
guarantee on when and if the async disconnect operation will finish.
One issue caused by the 'connection' not cleared was that
CONNECTION_FAILED was not reduced correctly and the reload screen was
not displayed for the following scenario:
1. Join and leave any working conference.
2. Turn off network connectivity on the device.
3. Wait for CONNECTION_FAILED. The reload screen will not be displayed,
because CONNECTION_FAILED is not reduced correctly, because the old
'connection' value is still there.
* Adds an option to disable features based on token data.
Reverts changes from b84e910086, removes disableDesktopSharing option and an interface_config option.
* Disable recording button based on token features data.
Hide recording if local participant isGuest and roles based on token.
When enableUserRolesBasedOnToken is enabled we were not hiding the record button for guests.
* Adds filtering of jibri iqs and rayo based on features.
Moves feature checking in separate utility function.
Renames utility method.
* Adds a footer text when outbound-call is not feature enabled.
* Fixes comments.
[RN] Simplify logic for using tinted view in ParticipantView
Use it unless the connection is not ACTIVE. We don't really care if it's
recovering or whatever, if it's not active it has problems, so that's that.
This fixes a potential edge case in which the connection remains in RESTORING
state for some time.
ref(toolbar): show recording features based on explicit configs (#3080)
* ref(toolbar): show recording features based on explicit configs
* squash: bring back button configs, use final config names
* squash: update interfaceConfig comment, remove unused config whitelist
* squash: change order of button enabled checks to reduce diff
* squash: fileRecording -> fileRecordings
Layout:
Use an absolute-fill view as the background with the sidebar on top of. This
greatly simplifies styling, as there is no need to calculate how large the
backdrop needs to be.
Animation:
Switch to a translateX transform animation. This serves 2 purposes: first,
there seems to be a bug somewhere in React Native 0.51-0.55 where the content
that is being animated starts to be clipped. Very weird! But more importantly,
translateX transmorm animations are supported by the native animation driver!
https://facebook.github.io/react-native/blog/2017/02/14/using-native-driver-for-animated.html8f5ebe5952/Libraries/Animated/src/NativeAnimatedHelper.js (L138-L176)
This makes the animation more performant and buttery smooth.
Some small cleanups are also included here.
ref(video-layout): get dominant speaker state from redux
Instead of keeping dominant speaker locally, get it from redux and be
updated when the dominant speaker changes. This is in an attempt to mimic
the video layout being reactified and connected to redux.
The visibility of the toolbar can be toggled by interacting with the main screen.
This change allows the toolbar to be configured to be 'always visible'. This voids
the 'toggle' functionality.
Simplify parts of the logic introduced in
11b7144ad0.
Specificaly, using all the state change avoiding functions doesn't give us much
since we need to copy the state for sure.
fix(base/participants): ensure default local id outside of conference
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
If the ID of a remote participant was the same as the ID of the local
participant (across multiple conferences), removing the remote
participant on PARTICIPANT_LEFT would remove the local participant.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
If a leave is delayed and the leaving JitsiConference manages to sneak a
PARTICIPANT_JOINED in, it may create a remote participant who even
collides with the local participant.
With so many abstractions called conference, I'm not surprised I made a
mistake and my reviewer didn't catch it.
As we are transitioning from remote participants identified by ID alone
to an ID-conference pair, the subsequent commits "Protect against late
PARTICIPANT_JOINED" and "Refine PARTICIPANT_LEFT for ID collisions"
caught the error.
ref(base/conference): clear the 'conference' field on WILL_LEAVE
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).
Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.
What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:
The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.
Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.
Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
This fix is based on storing the location URL object we are loading the
configuration for in the redux store. Once the config has been loaded (or it has
failed, for that matter!) we'll check if the current "config URL" is the same we
set, and discard the old one if they don't match.
damencho
Saúl Ibarra Corretgé
virtuacoplenny
Hristo Terezov
paweldomas
Daniel Ornelas
Lyubo Marinov
Bettenbuk Zoltan
bbaldino
Guus der Kinderen