JitsiConference shouldn't lie that the leave() was successful when it
was not.

* feat(recording): frontend logic can support live streaming and recording

Instead of either live streaming or recording, now both can live together.
The changes to facilitate such include the following:
- Remove the old recording.js module which allowed one recording at a time.
- Remove events for live stream url changes as the url is now part of a
  sesssion and not fired independently.
- Availability of sipgw and recording are gone. Instead sessions have a
  failure reason. For sipgw sessions, store that failure and emit it to
  listeners.
- Create a new recordingManager singleton that can start/stop sessions
  and handle updating known state of those sessions. Known state is
  emitted through one event.
- Create a JibriSession model to encapsulate state of a session.

* update comments, use map to store sessions

* always pass in focusmucjid

* try to fix jibrisession docs and remove default null

* feat: Exposes sending JSON payload through XMPP.

Incudes only the payload when firing events for JSON trannsported
through XMPP.

* squash: Addresses feedback.

* squash: Addresses more feedback.

* feat(recording): show the YouTube live stream URL

- Pass you_tube_broadcast_id to Jibri so it can create a
  YouTube link for the live stream.
- Emit the liveStreamViewURL (the YouTube link) when it
  is received from the participant doing the recording.

* set member.liveStreamViewURL only when truthy

Will emit CONNECTION_ESTABLISHED event to fill up the gap where the lib
users are not able to tell whether or not the connection has been
established if there were no interrupted/restored events emitted.

In order to include browser capabilities in RTCBrowserType I needed to
refactor RTCBrowserType.

* wip: initial version of the new AnalyticsAdapter.

* ref: Restructures the ICE duration and state change events.

* ref: Restructures the JitsiLocalTrack events.

* ref: Restructures the TTFM events.

* ref: Updates the user feedback event.

* ref: Restructures the _CONNECTION_TIMES_ and TTFM events.

* ref: Restructures the BRIDGE_DOWN and NO_DATA_FROM_SOURCE events.

* ref: Restructures the FOCUS_LEFT event.

* ref: Restructures the DATA_CHANNEL_OPEN event.

* ref: Removes the ICE_FAILED event (it is a duplicate of a state change event).

* ref: Restructures the device list events.

Uses one event per device, since the new format does not allow non-atomic attributes.

* fix: Does not obey "unmute" commands from the focus.

* ref: Restructures the "remotely muted" event.

* ref: Restructures the CONFERENCE_ERROR events.

* ref: Removes the CONNECTION_INTERRUPTED event

We can use ICE_STATE_CHANGED instead.

* ref: Renames isreconnect to isReconnect.

* ref: Removes the CONNECTION_RESTORED event. Use ICE state changes instead.

* ref: Restructures the p2p events.

* ref: Restructures the jingle events.

* ref: Restructures the RTP statistics event.

* ref: Restructures the CONNECTION_FAILED and DISCONNECTED events.

* ref: Restructures the getUserMedia analytics events.

* ref: Cleans up AnalyticsEvents and restructures some of the events.

* fix: Adds error logs to the analytics adapter.

* ref: Refactor Statistics.sendEventToAll

Renames to sendEventAndLog, supports the object-based API, uses the
function where appropriate.

* fix: Addresses PR feedback.

* fix: Addresses Lyubomir's feedback.

* ref: Remove unused functions, adds documentation.

* feat: Adds a Statistics.sendAnalytics shortcut.

* ref: Uses the conference name as the default containerId.

* fix: Adrdesses Lenny's feedback.

* fix: Addresses more feedback.

* fix: Uses 'operational' as the default event type.

* doc: Updates the documentation.

* fix: Fixes adding of permanent properties.

* ref: Uses consistent naming for events' attributes.

Uses "_" as a separator instead of camel case or ".".

* feat: Adds the conference name as a permanent property automatically.

* ref: Don't expose Setting.machineId.

* fix: Adds a "p2p" attribute to jingle events.

* ref: Uses "action" instead of "name".

* ref: Uses underscore in events' attribute names.

* ref: Logs a message to the logger/console

instead of callstats in sendAnalyticsAndLog().

* Passes getWiFiStatsMethod to callstats.

* Prints WiFi addresses on attachWifiStatsHandler.

* Updates callstats version to 3.27.0.

Adds rtc.LOCAL_TRACK_SSRC_UPDATED event to be emitted when ssrc is updated for a local track.
Fixes adding rtc listeners for CREATE_ANSWER_FAILED, CREATE_OFFER_FAILED, SET_LOCAL_DESCRIPTION_FAILED, SET_REMOTE_DESCRIPTION_FAILED.

* Changes initialization of videoSIPGW.

* Adds some errors returned on creating videoSIPGW session.

* Fixes sending videoSIPGW session STATE_CHANGED event.

* Fixes sending jibriIQ, no result status is received.

* Adds VIDEO_SIP_GW_SESSION_STATE_CHANGED to JitsiConferenceEvents.

* Fixing comments.

* ref: Simplifies the logic for handling an incoming jingle session-initiate.

* fix: Don't redundantly log cross region

information under a field name called "label".

* cleanup: Simplifies code. Adds the userAgent as a permanent property

for statistics (so that the client doesn't have to).

* ref: Names the parameter which specifies the name of the event "eventName".

* ref: Extracts event names to AnalyticsEvents.

* ref: Exports and imports constants individually.

* fix: Fixes CONNECTION_TIMES event names.

* ref: Arranges constants alphabetically.

* ref: Adds line breaks.

* revert: Reverts be665cbff7.

* ref: Renames "peerjid".

* ref: Refactors the initialization of a peer connection.

* feat: Re-implements the A/B test for the "suspend video" feature.

* squash: Deep copy.

* ref: Renames forceSuspendVideo to abtestSuspendVideo.

* Uses optional statsId to report to callstats and push it to presence.

The feature is behind a flag which is disabled by default.

* Renames statsId to statsID.

* Fixes doc.

ESLint 4.8.0 discovers a lot of error related to formatting. While I
tried to fix as many of them as possible, a portion of them actually go
against our coding style. In such a case, I've disabled the indent rule
which effectively leaves it as it was before ESLint 4.8.0.

With JitsiAuthConnection the API consumer has to:
1. JitsiConference.createAuthenticationConnection,
2. JitsiAuthConnecition.authenticateAndUpgradeRole,
3. Wait on the Promise of 2,
4. Maybe cancel the JitsiAuthConnection of 1.

With authenticateAndUpgradeRole the API consumer has to:
1. JitsiConference.authenticateAndUpgradeRole,
2. Wait on the thenableWithCancel of 1.
3. Maybe cancel the thenableWithCancel of 1.

As opoosed to using window.location, which is not available on all platforms,
notably on mobile.

Reduce the source code by replacing this.options.config with config.

There are scenarios when it's ok to call setP2PStatus again with
the same value. For example when P2P is stopped, before it starts with
the A/B testing mode enabled. It's only important to know that it
happened, but it's not an error, because the code will not execute
and return immediately.

* feat(quality-slider): expose video constraint method and data channel opening

* squash: rename to data channel opened

The 'ondatachannel' even listener must be set as soon as
the TraceablePeerConnection is created and before the offer is accepted.
We've observed situations where the ondatachannel event was missed,
because the listener is bound too late from the JingleSessionPC
'acceptOffer' success callback.

The P2P session must be stopped with '_stopP2PSession' once accepted.

P2P test mode disables automatic switching to P2P when there are 2
participants in the room.

Will not accept incoming P2P session if it's disabled in the config.

* ref: Moves the deployment info variables to config.js

instead of using globals.

* feat: If configured, adds the user's region to presence.

* fix: Guards against accessing undefined properties,

and uses the crossRegion variable from the config.

* style: Fixes formatting.

Until we have a default config template, make sure we default to having P2P
enabled.

Also add a preferH264 option for P2P.

Some browsers may not support data channels (hi there, Edge!) and sometimes it
may not be desirable for other reasons.

* ref(JSPC): simplify SSRC owner in P2P

There's no need for any extra extensions for SSRCs owner signalling in
P2P, because it's always the remote peer who owns them.

This also fixes a problem where no SSRC owner was added for 'source-add'
in P2P (for JVB conference Jicofo adds that).

* fix(TPC): always advertise 'sendrecv'

Our media direction is only ever updated on the remote side with
the initial offer (or answer). Because of that we want to advertise
'sendrecv' even if we start with no video (or audio) track.

It is OK to adjust this direction in the localDescription getter,
because it's adjusted again in the setter to the correct value based on
local tracks, so the SDP transformation chain still works fine.

Add 'forceJVB121Ratio' config option which allows to enforce JVB
conference even if the P2P connection can be established. In such case
'forceJVB121' permanent analytics property will be added.

Will also set 'p2pFailed' analytics property to 'true' in case ICE fails
on the P2P connection.

The JVB121 stats calculators should reset on transition from P2P to
JVB121 conference type.

When the lastN is set to 0 the P2P session will notify the remote peer
to stop sending video.

Reorders JitsiTrackEvents.TRACK_AUDIO_LEVEL_CHANGED event arguments by
putting TraceablePeerConnection at the end. This way it's easier to
treat it as "library internal".

Will actively terminate P2P session by the responder (not moderator) in
order to shutdown P2P in case of eventual initiator's crash. Otherwise
the responder will stay in P2P for too long (until P2P ICE fails).

Prevents from printing Jingle 'session-terminate' error response in case
both responder and initiator terminates their sessions simultaneously
(gracefully). In that case 'item-not-found' error is returned by each
party, because the session is removed immediately from the memory on
termination (see strophe.jingle.js).

If for any reason invite for the JVB JingleSession is delayed and
arrives after the P2P connection has been established then
the media transfer needs to be disabled after the offer is accepted.

If the app depends on tracking current tracks state using
"track added/removed" events, the tracks will be leaking if
JitsiConference.leave() method is used. That's because peerconnections
are closed and removed from RTC module and then from onMemberLeft those
events will not be fired, because tracks will be gone with
the peerconnections.

Also removes error message log, because it no longer makes sense if
the tracks can be removed early by "stop P2P" logic without actually
removing them from the TPC. Then when the TPC is closed it will try to
emit the events again. But this time it will not match any tracks in
the JitsiParticipant, because it has been removed already.

Avoid a crash if for whatever reason there is no JVB JingleSessionPC at
the time when P2P is being stopped.

Add FIXME about possible situation where Jicofo invite will arrive after
the P2P has been established already.

Dominant speaker detection which is just based on current audio level of local or remote p2p track. The threshold value is the same used for talk while muted detection.